2000 Mercedes-Benz clk-class Cabriolet Owner’s Manual

Free pdf 2000 Mercedes-Benz clk-class Cabriolet Owner’s Manual

To train a garage door opener (or other rolling code devices) with the rolling code feature, follow these instructions after completing the “Programming” portion of this text. (A second person may make the following training procedures quicker and easier.)

  1. Locate training button on the garage door opener motor head unit. Exact location and color of the button may vary by garage door opener brand. If there is difficulty locating the transmitting button, reference to garage door opener operator’s manual. 
  2. Press “training” button on the garage door opener motor head unit (which activated the “training light”). Note:Following step 2, there are 30 seconds to initiate step 3.
  3. Firmly press and release the programmed integrated remote control transmit button. Press and release same button a second time to complete the training process. (Some garage door openers may requires you to do this procedure a third time to complete the training.)
  4. Confirm the garage door operation by pressing the programmed button on the integrated remote control transmitter. 

Canadian programming:
During programming, your hand-held transmitter may automatically stop transmitting. Continue to press and hold the integrated remote control transmitter button (note steps 2 through 4 in the “Programming” portion) while you press and re-press (“cycle”) your hand-held transmitter every two seconds until the frequency signal has been learned. The indicator lamp will flash slowly and then rapidly after several seconds upon successful training.

The condition of the parking brake system is checked each time the vehicle is in the shop for the required maintenance service.If the parking brake is released and the brake warning lamp in the instrument cluster stays on, the brake fluid level in the reservoir is too low. Brake pad wear or a leak in the system may be the reason for low brake fluid in the reservoir.

Have the brake system inspected at an authorized Mercedes-Benz Center immediately. All checks and service work on the brake system should be carried out by an authorized Mercedes-Benz Center. Install only brake pads and brake fluid recommended by Mercedes-Benz.

Catalytic Converter 
Your Mercedes-Benz is equipped with monolithic type catalytic converters, an important element in conjunction with the oxygen sensors to achieve substantial control of the pollutants in the exhaust emissions. Keep your vehicle in proper operating condition by following our recommended maintenance instructions as outlined in your Service Booklet. 

Before Starting 
Ensure that parking brake is engaged and that selector lever is in position "P" or "N".  
Turn electronic key in steering lock to position 2. The charge indicator lamp should come on. 
Starting (Model C 230) 
Do not depress accelerator. Turn electronic key in steering lock clockwise to the stop.  Release electronic key only when the engine is firing regularly. 

(Models C 280, C 43 AMG) 
Do not depress accelerator. Briefly turn electronic key in steering lock clockwise to the stop and release.  The starter will engage until the engine is running. If engine will not run, and the starting procedure stops,  turn electronic key completely to the left and repeat starting the engine. After several unsuccessful attempts,  have the system checked at the nearest authorized Mercedes-Benz dealer. 

Please observe the following in your own best interest:
We recommend using genuine Mercedes-Benz parts as well as conversion parts and accessories explicitly approved by us for your vehicle model.
We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.

We are unable to make an assessment for other products and therefore cannot be held responsible for them, even if in individual cases an official approval or authorization by governmental or other agencies should exist. Use of such parts and accessories could adversely affect the safety, performance or reliability of your vehicle. Please do not use them.

Genuine Mercedes-Benz parts as well as conversion parts and accessories approved by us are available at your authorized Mercedes-Benz Center where you will receive comprehensive information, also on permissible technical modifications, and where proper installation will be performed.

This Operator’s Manual contains a great deal of useful information. We urge you to read it carefully and familiarize yourself with the vehicle before driving.
For your own safety and longer service life of the vehicle, we urge you to follow the instructions and warnings contained in this manual. Ignoring them could result in damage to the vehicle or personal injury to you or others. Vehicle damage caused by failure to follow instructions is not covered by the Mercedes-Benz Limited Warranty.

Your vehicle may have some or all of the equipment described in this manual. Therefore, you may find explanations for optional equipment not installed in your vehicle. If you have any questions about the operation of any equipment, your authorized Mercedes-Benz Center will be glad to demonstrate the proper procedures.

2000 Mercedes-Benz clk-class Cabriolet Owner’s Manual For Free

(0) Comments

Leave A Response

Your email address will not be published with your comments.

Reload Image