Pdf Manual Guidelib.com

2012 KTM 125-150-250 SX 250-300 XC Users Manual

2012 KTM 125-150-250 SX 250-300 XC Users Manual

Online PDF 2012 KTM 125-150-250 SX 250-300 XC Users Manual

2012 KTM 125-150-250 SX 250-300 XC owners manual Hand brake lever
The hand brake lever 3 is mounted on the handle bars on the right and actuates the front wheel brake. The adjusting screw B can be used to change the basic position of the hand brake lever (see "Maintenance").

2012 KTM 125-150-250 SX 250-300 XC owners manual Speedometer, indicator lamps (EXC AUS)
The mileage indicator A in the speedometer 5 indicates overall mileage. When the turn indicator is on, the green indicator lamp 6 will be flashing in the same rhythm. The blue indicator lamp 7 will be lit when the high beam is on

2012 KTM 125-150-250 SX 250-300 XC owners manual Clutch lever
The clutch lever 1 is located on the left side of the handlebar. The adjusting screw A is used to change the original position of the clutch lever (see maintenance work on chassis and engine).

2012 KTM 125-150-250 SX 250-300 XC owners manual Hand decompression lever
The hand decompression lever 2 is needed only if a fall on your motorcycle causes overflowing in the carburetor. To "pump the engine free", pull the hand decompression lever during the starting procedure. The outer end of the lever must at all times provide for a backlash of approx. 10mm (0,4 in). Only thereafter may it cause valve motion (to be recognized by the stronger resistance which the hand decompression level encounters).

2012 KTM 125-150-250 SX 250-300 XC owners manual Hand brake lever
The hand brake lever 3 is mounted on the handle bars on the right and actuates the front wheel brake. The adjusting screw B can be used to change the basic position of the hand brake lever (see "Maintenance").

2012 KTM 125-150-250 SX 250-300 XC owners manual Speedometer, indicator lamps (EXC AUS)
The mileage indicator A in the speedometer 5 indicates overall mileage. When the turn indicator is on, the green indicator lamp 6 will be flashing in the same rhythm. The blue indicator lamp 7 will be lit when the high beam is on

Managing the Vehicle Damage Repair Process
In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there. Specify to the facility that any required replacement collision parts be original equipment parts, either new Genuine GM parts or recycled original GM parts. Remember, recycled parts will not be covered by your GM vehicle warranty.

Insurance pays the bill for the repair, but you must live with the repair. Depending on your policy limits, your insurance company may initially value the repair using aftermarket parts. Discuss this with your repair professional, and insist on Genuine GM parts. Remember if your vehicle is leased you may be obligated to have the vehicle repaired with Genuine GM parts, even if your insurance coverage does not pay the full cost.

If another party’s insurance company is paying for the repairs, you are not obligated to accept a repair valuation based on that insurance company’s collision policy repair limits, as you have no contractual limits with that company. In such cases, you can have control of the repair and parts choices as long as cost stays within reasonable limits.

Share:

Related KTM User Manuals

Popular User Manual (Show All)