Online Pdf Ford Ranger 2011 Body Repair Manual
Ford Body Repair Manual. With the 2000 model year a new commercial vehicle, the Ford “RANGER” is introduced. This new pick-up truck is added to Ford’s four-wheel drive vehicle line, but is also available as a two-wheel drive version.
The object of the Ford “RANGER” course is to present the vehicle and familiarize you with the vehicle components and systems. To this end, the training literature has been split into the following publications based on the main areas:
Ford Ranger Technical Service. This New Product Introduction is designed to give an overview of the entire powertrain of the Ford “RANGER”.
The WL/WL-T engines are dealt with in detail. There are descriptions of the design and operation of the mechanical components and the engine management system. In addition, notes are provided on diagnosis and testing.
Ford Ranger. Descriptions are also given of the R15M-D and R15MX-D manual transmissions as well as the transfer case.
Further, the drive shafts, differentials and the freewheel mechanism are dealt with. Additionally, important instructions for use are to be found in the appropriate section.
Ford Technical Service. Detailed information about the vehicle’s chassis and electrical and electronic systems as well as the heating, ventilation and air conditioning system is provided in the corresponding Student Information publication.
Ford Repair Manuals. Please remember that our training literature has been prepared solely for FORD TRAINING PURPOSES. Repair and adjustment operations MUST always be carried out according to the instructions and specifications in the workshop literature.
Please make extensive use of the training courses offered by Ford Technical Training Centers to gain extensive knowledge in both theory and practice.
Online Pdf Ford Ranger 2011 Workshop Repair Manual
Ford Workshop Manuals. To the best of our knowledge, the illustrations, technical information, data and descriptions in this issue were correct at the time of going to print. The right to change prices, specifications, and equipment and maintenance instructions at any time without notice is reserved as part of FORD policy of continuous development and improvement for the benefit of our customers.
Ford Service Manuals. No part of this publication may be reproduced, stored in a data processing system or transmitted in any form, electronic, mechanical, photocopy, recording, translation or by any other means without prior permission of Ford Motor Company. No liability can be accepted for any inaccuracies in this publication, although every possible care has been taken to make it as complete and accurate as possible.
Managing the Vehicle Damage Repair Process
In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there. Specify to the facility that any required replacement collision parts be original equipment parts, either new Genuine GM parts or recycled original GM parts. Remember, recycled parts will not be covered by your GM vehicle warranty.
Insurance pays the bill for the repair, but you must live with the repair. Depending on your policy limits, your insurance company may initially value the repair using aftermarket parts. Discuss this with your repair professional, and insist on Genuine GM parts. Remember if your vehicle is leased you may be obligated to have the vehicle repaired with Genuine GM parts, even if your insurance coverage does not pay the full cost.
If another party’s insurance company is paying for the repairs, you are not obligated to accept a repair valuation based on that insurance company’s collision policy repair limits, as you have no contractual limits with that company. In such cases, you can have control of the repair and parts choices as long as cost stays within reasonable limits.