Audi R8 Owners Manual 2007

Online PDF Audi R8 Owners Manual 2007

Thank you for choosing the Audi R8.
The new Audi R8 combines the latest technology with numerous features for your comfort and convenience. To help you get the best out of these features in everyday use, we recommend that you read this Manual carefully.

As well as information on how to use the controls and equipment, the Owner's Manual contains important notes on care and maintenance. These are relevant to your safety and will help preserve your car's value.

In addition to this Owner's Manual, the Service Wallet also includes the Operating Manual for your infotainment system and the Service Schedule. The Service Schedule contains important information on Audi service requirements and lists the vehicle's fuel consumption figures. We recommend that you keep the Service Wallet in the car at all times.

Our Audi R8 dealers are comprehensively trained and qualified to ensure that you receive the highest level of quality, comfort and convenience. Should you have any further questions regarding your car or if you suspect that your owner's literature is not complete, please contact your Audi R8 dealer or importer. They are always glad to answer your queries and note any suggestions you may have.
We wish you safe and enjoyable motoring with your Audi R8.
AUDI AG

Technical  information  should  always  be  available  to  the  foremen  and  mechanics,  because  their careful and constant adherence to the instructions is essential to ensure vehicle road worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.

Battery with sealing plugs 

  1. A visual check of the battery is sufficient for batteries with clearly visible external min. and max. marks.
  2. The electrolyte level must be above the minimum marking, but must not exceed the maximum marking.
  3. If the external min. and max. marks on the battery are not clearly visible or if the electrolyte level cannot be checked properly due to an opaque battery housing, the sealing plugs must be unscrewed. It is then possible to visually check the electrolyte level from the inside.
  4. The electrolyte level must align with the marking inside the battery (plastic moulding). This corresponds to the max. mark‐ ing on the outside.

Before using the test gauge to check the pad thickness, push the sliding ring towards the tip of the gauge as far as it will go. Then insert the test gauge through the wheel rim and bring the tip of the gauge into contact with the brake disc. Then slide the body of the gauge uniformly towards the brake pad until the gauge makes contact with the backplate of the brake pad. Then take out the test pin and read off the value on the scale marked with the brake symbol.

Online PDF Audi R8 Owners Manual 2007